HomeNewsColorfastness to Rubbing: Dry and Wet Test Buying Checks

Colorfastness to Rubbing: Dry and Wet Test Buying Checks

Published 2026-11-04 · Shengchao Textile

Colorfastness to rubbing measures whether colour transfers from a textile onto another material during controlled rubbing. Buyers normally need to distinguish dry and wet conditions, identify the tested face and connect the result to an exact colour and fabric lot. It is not the same property as resistance to washing, sunlight or abrasion. A red uniform fabric can look consistent on a hanger while still needing separate evidence about transfer onto pale clothing or adjacent components.

The useful purchasing question is therefore specific: under the agreed rubbing method and condition, does this article meet the customer’s staining requirement? This guide shows how to turn that question into a clear sample request and approval record.

Understand what a rubbing test actually evaluates

ISO 105-X12 covers resistance of textile colour to transfer through rubbing and staining another material. Its published scope distinguishes tests using a dry rubbing cloth and a wet one. Treat these as separate conditions in the report. A result labelled only colourfastness leaves too much unresolved to support a bulk order, because the word can describe several different exposures.

The visible assessment concerns the receiving cloth rather than simply whether the original fabric still looks attractive. A dark sample can retain most of its appearance yet leave an objectionable mark on a pale surface. When reviewing photographs, request identification of both the original specimen and the receiving cloth. A picture of an unchanged red swatch alone does not answer the transfer question.

The ISO 105-A03 grey scale for assessing staining concerns evaluation of staining. Keep that distinction clear when reading a report that also includes colour-change ratings. A buyer should not transpose a value from one column into the other. Ask the laboratory to identify the reported assessment and the applicable requirement without relying on a screenshot that has lost its headings.

Close surface view of red polyester-spandex school uniform fabric

Separate dry rubbing, wet rubbing and laundering

Dry rubbing and wet rubbing represent different test conditions. If a program requires both, passing one does not close the other. Ask for the actual result for each condition rather than a single overall statement. The acceptance requirement should be established with the customer before testing, since a supplier cannot fairly evaluate a target that changes after the result is known.

Laundering introduces its own combination of treatment conditions and assessment. Do not infer wash performance from a rubbing result, or the reverse. If the proposed garment combines dark panels and white trims, identify the real care instruction and request relevant testing for that assembled colour combination. A report for the main fabric does not necessarily address every trim, thread or contrasting fabric used later.

Likewise, rubbing fastness is not a measure of how many abrasion cycles a textile survives before breakdown. Both tests involve contact, but their objectives differ. The broader knit versus woven fabric guide helps identify construction before testing. A structure name should guide specimen identification and method selection, not stand in for a measured fastness result.

Write a useful testing brief

Brief item Required clarification Why it matters
Fabric identity Article, lot and colour reference Connects evidence to the order
Test condition Dry and wet listed independently Prevents incomplete approval
Face and direction Identify relevant surfaces and specimen orientation Makes comparisons interpretable
Preparation As received or agreed care treatment Distinguishes initial and treated states
Assessment Staining result with complete headings Avoids confusing it with colour change
Acceptance Customer requirement and decision owner Stops arbitrary pass claims

This checklist describes information to request, not machine settings. The testing laboratory should apply the full authorized procedure. If the customer specifies a different method, identify it explicitly and ask whether existing data are comparable. Do not replace the requested procedure with another one merely because both results use a familiar scale.

Apply the brief to a uniform fabric sample

Shengchao’s school uniform fabric product is a relevant starting point for sample discussion. The website image shows a red textile with a fine surface structure; it is not evidence of a particular print process or a rubbing grade. Refer to the actual supplied sample and written specification when deciding what to test. A product name or photograph cannot establish fastness.

For a school uniform program, map contact with shirts, waistbands, bags and contrasting components. That map helps the apparel team explain why transfer matters for this garment. It does not create a laboratory limit by itself. The customer should approve the requirement, and the mill should confirm which article, colour and production stage the submitted report represents.

If the design uses a dark outer fabric and a light inner component, approve the combination together. Record which material touches which during use and care. When a stain appears on a trial garment, preserve both components and identify their lots. Otherwise, an investigation can become a debate over the main fabric while the receiving material, trim or finishing route remains undocumented.

Read the report before accepting the conclusion

Check the method designation, report date and specimen description first. Next, find the condition headings and the result for each required direction or face. Finally, compare those results with the order’s acceptance criteria. A pass statement is only meaningful when the report and the commercial specification use the same basis. Where the report omits relevant details, ask for clarification before approving cutting.

Do not treat an image of a clean rubbing cloth as an independently interpretable grade. Lighting, exposure, background and image processing can alter its appearance. Photographs are useful records when they accompany a proper assessment, but they should not replace the laboratory’s report. Retained physical specimens give the parties a stronger basis for resolving disagreements than compressed pictures in a messaging application.

For broader shipment decisions, connect fastness evidence to the fabric quality checks before shipment. The fastness report addresses one requirement; roll identity, visible defects and quantity still need their own records. Keep these approvals together so a satisfactory laboratory result cannot accidentally authorize a different article or shade.

Sample documentation view of red polyester-spandex school uniform fabric

Investigate transfer without inventing a diagnosis

If a trial reveals transfer, stop describing it with a broad label such as poor quality and document the observation. Note the contact materials, whether moisture was involved, the care history and the location of the mark. Keep an untouched control. This record helps the laboratory choose a relevant investigation while avoiding a premature conclusion about dye chemistry or production conditions.

A supplier may propose revised washing, fixation or finishing. Ask for a separately coded revised sample and a new assessment under the agreed conditions. Do not assume that any single process adjustment will solve every colour or construction. Also review shade, hand feel and other required properties after the revision. The buyer is approving a complete textile, not just one improved number.

Avoid using household treatment as an undocumented production fix. A hand-washed swatch can help an investigation, but it does not show how a full lot has been processed. When a revised route is approved, request traceability from the development sample to the production lot and retain the associated report. That makes the corrective action reproducible and auditable.

Coordinate colour approval with dimensional approval

Care-related preparation should be consistent across relevant evaluations. If the design team checks dimensions after a particular care route while fastness is assessed under another unspecified treatment, the combined approval may not describe one real garment condition. Our fabric shrinkage guide explains how to keep dimensional records clear. Use separate results, linked by a common specimen identity and care brief.

For repeat orders, retain the approved colour reference and identify changes in article or processing. A previous season’s report may be useful background, but it needs a defined coverage decision. Ask the responsible customer or laboratory whether current evidence is sufficient. Never present a historic report as a fresh test of a new lot simply because the colour name has stayed the same.

Choose representative specimens

Agree how sampling will represent the proposed delivery. A convenient swatch from an unidentified development roll cannot establish a result for an entire order. Keep the selection record with the laboratory submission, and distinguish a preliminary screening sample from a production acceptance sample.

Watch an educational rubbing-test demonstration

Textile knowledge explains colourfastness to rubbing using a laboratory demonstration. The channel describes its purpose as teaching textile concepts to students. This is an educational aid, not a certificate for the fabric shown here; use the applicable method and report for acceptance.

Common purchasing questions

Does a dry rubbing pass cover wet rubbing?

No. Request a separate wet-condition result whenever it is required. Keep both conditions visible in the approval record and compare each against the agreed customer requirement.

Can a photograph prove a fastness grade?

No. Use the laboratory assessment with its complete test conditions. Photographs support traceability and discussion, but uncontrolled viewing conditions make them insufficient as the sole grading evidence.

Does rubbing fastness prove washing durability?

No. They evaluate different exposures. Establish separate requirements for the garment’s intended care and contrasting materials, and obtain the corresponding evidence.

What belongs in the final approval?

Record the article, lot, shade reference, method, dry and wet results, preparation and acceptance decision. Attach the retained-sample reference so future production can be checked against the same approved basis.