HomeNewsHydrostatic Head for Fabric: How to Read Waterproof Ratings

Hydrostatic Head for Fabric: How to Read Waterproof Ratings

Published 2026-11-03 · Shengchao Textile

Hydrostatic head describes the water pressure a fabric resists at the endpoint of a specified test. It is often expressed as millimetres of water column. A value of 1,000 mm corresponds approximately to the pressure generated by a one-metre column of water; it does not mean the material will keep a wearer dry through 1,000 mm of rainfall or for a fixed number of hours. For apparel buying, read the number together with the test method, specimen condition, reporting units, and intended garment.

This guide focuses on interpreting a hydrostatic report and comparing quotations. For the broader difference between waterproof and water-repellent claims, use the linked material-selection guides rather than treating one pressure value as a complete clothing specification.

What the hydrostatic-head number actually represents

Pressure increases with the height of a water column. That relationship allows a pressure to be expressed as an equivalent height of water. A laboratory can apply controlled water pressure to a fabric specimen without building a literal tower as tall as the reported rating.

The report describes a specimen under defined laboratory conditions. It is not a forecast for a whole jacket in every weather situation. The material may include a coating or laminate, or use another construction; establish those details from its specification rather than inferring them from the rating or a product photograph.

ISO 811 identifies a hydrostatic-pressure method for determining textile resistance to water penetration. A reference to the standard names a procedure. It should not be presented as a blanket certification of a garment or a universal pass threshold for every application.

Convert water-column height and pressure carefully

For a simple explanatory calculation, the pressure difference associated with a liquid column is Δp = ρgh. Here, ρ is liquid density in kg/m³, g is gravitational acceleration in m/s², and h is height in metres. The result is in pascals. Using an approximate water density of 1,000 kg/m³ and g = 9.81 m/s² gives about 9,810 Pa, or 9.81 kPa, for one metre of water.

These assumptions are suitable for understanding the scale of the numbers. Formal reporting should follow the method’s required units and conversion conventions. Do not replace a laboratory’s stated result with a more precise-looking conversion that ignores its measurement basis.

Equivalent water-column height Height in metres Approximate pressure How to interpret it
100 mm 0.1 m 0.981 kPa A pressure equivalence, not a rain-duration claim
1,000 mm 1 m 9.81 kPa The same approximate pressure expressed in different units
5,000 mm 5 m 49.05 kPa An illustrative conversion, not a product result
10,000 mm 10 m 98.1 kPa No automatic conclusion about comfort or garment seams

The table is calculated from the formula and assumptions above. Khan Academy’s pressure-at-depth lesson explains the physical relationship. The examples are not measured results for any Shengchao fabric.

Close view of blue grey nylon spandex with its original fine texture and folds

Why rainfall depth and water-column height are different

Rainfall depth describes an amount of precipitation accumulated over an area. A hydrostatic-head value expresses an equivalent pressure at a defined test endpoint. The two measurements may both use millimetres, but they answer different questions.

Consequently, “10,000 mm waterproof” cannot be translated directly into a permitted daily rainfall total, a duration in a storm, or a number of washing cycles. Exposure, movement, garment design, material condition, and the evaluation procedure remain separate considerations.

If a marketing brief uses a number without identifying the method or specimen, ask for the underlying report. A short, traceable statement about what was tested is more useful than a large figure with no connection to the actual article being purchased.

What to check on a hydrostatic test report

Material identity and treatment history

Confirm the fabric article, lot, composition, construction, finish, shade, and production stage. Determine whether the specimen was tested as supplied or after washing, abrasion, flexing, or another treatment. An initial result and a post-treatment result should remain separately labeled.

Method, edition, and relevant conditions

Read the complete method identification and any deviations. Ask the laboratory to explain conditions relevant to the comparison, including how the specimen was prepared and which face was exposed. Do not assume two reports are equivalent merely because both mention hydrostatic pressure.

Endpoint and reporting limits

Clarify how the method defines penetration and how the result is summarized across specimens. Distinguish a measured endpoint from a statement that no penetration occurred up to the equipment’s test limit. A result reported as greater than a limit is not an exact measurement above that limit.

For example, if a laboratory reports no penetration up to a stated pressure limit, retain that wording in the comparison sheet. Do not turn it into a fabricated exact endpoint or assume how far above the limit the material would perform. If the commercial requirement depends on a higher value, ask the laboratory what additional assessment is needed and whether the equipment and selected procedure can support that decision.

Units and acceptance criteria

Keep the original units visible when entering results into a comparison sheet. State whether the commercial decision uses an individual value, a minimum, an average, or another agreed reporting rule. Agree the acceptance basis before testing rather than choosing a convenient rule after results arrive.

Hydrostatic resistance is different from surface repellency

A spray assessment concerns surface wetting, while hydrostatic testing concerns water penetration under pressure. SGS’s explanation of rain-resistance testing describes why a face can become wet while an underlying barrier still resists penetration. A water-beading demonstration therefore cannot replace a suitable pressure report.

For purchasing, keep the required properties in separate fields. Ask whether the garment needs a particular surface appearance after wetting, resistance to penetration, or both. If appearance changes after care, investigate that property rather than assuming every water-related function has failed at the same time.

Our waterproof versus water-resistant fabric guide covers the terminology. The present article addresses the pressure number and its reporting limits, so the two pages serve complementary decisions.

Blue grey nylon spandex fabric beside a blank sample card

Apply the questions to an actual product listing

Shengchao’s 70D nylon-spandex outdoor fabric is listed as 90% nylon and 10% spandex, at 140–145 g/m² and 150 cm wide. The listing names outdoor jackets and hiking pants among its applications. These details identify a sampling candidate, but do not provide a published hydrostatic-head value.

Request the current report and finish specification if your program requires a particular penetration-resistance result. Do not infer a membrane, coating thickness, test threshold, or post-wash durability from the product name. The product-based images here illustrate appearance only and do not depict a pressure test.

Also confirm which production version the report represents. A sample tested before a finishing change may not answer the same question as a finished, printed, or otherwise processed production fabric. Keep the report linked to the approved article rather than to a broad nylon category.

Compare suppliers without creating a false ranking

Prepare a comparison sheet with one row per identified material. Record the original result and units, method, specimen condition, report date, and relevant construction details. Mark an unknown field as unknown instead of filling it with a figure from another fabric in the supplier’s collection.

If reports differ in important conditions, discuss a controlled comparison with the laboratory. Testing the shortlisted materials and a benchmark under the same relevant procedure can support a more useful decision than ranking unrelated numbers supplied in separate brochures.

Keep the commercial objective visible. A higher reported pressure value is not automatically a better choice if another candidate better meets weight, hand, movement, processing, and care requirements. Where a specific product standard or customer specification applies, use its actual requirements rather than a generic online waterproofness chart.

What remains to be approved in the garment

Seams, needle holes, closures, openings, design details, and local damage are not fully described by a flat-fabric number. Work with the garment manufacturer to determine how the material will be assembled and evaluated. A strong fabric result should not be used to skip an appropriate prototype review.

Comfort also needs separate attention. Hydrostatic resistance does not directly measure air permeability, moisture-vapour transport, or how a wearer experiences the complete clothing system. Avoid deriving a breathability score or a comfort promise from the head rating alone.

For related selection questions, see waterproof fabric types and lightweight waterproof fabric selection. Send the intended garment, care routine, benchmark, and required report through Shengchao Textile’s contact page when requesting samples.

Watch the water-pressure principle

Khan Academy explains pressure at depth in a fluid in the lesson below. It helps interpret why a water-column height represents pressure. It is background physics, not an ISO testing demonstration or evidence of a Shengchao product result.

Watch the Khan Academy pressure lesson on YouTube.

Frequently asked questions

Does 5,000 mm mean five metres of rain?

No. It is an equivalent water-column pressure at the stated test conditions, not a rainfall total or duration.

Can I compare a kPa result with a millimetre result?

Units can be converted, but the methods, specimen conditions, and reporting rules must also be comparable before ranking the materials.

Does a higher hydrostatic head prove better breathability?

No. Penetration resistance and moisture or air transport are separate properties that need appropriate evidence.

What if the product page gives no hydrostatic value?

Request a current report for the exact material and finish. Do not infer a measured value from the product title or a related SKU.